| 1. Conductors | 24AWG or 26AWG or 28AWG stranded bare copper. |
| 2. Insulation | polyolefin |
| 3. Color code | pair1: Blue, white/blue |
| pair2: Orange,white/orange | |
| pair3: Green,white/Green | |
| pair4: Brown,white/brown | |
| 4. Ripcord | under jacket |
| 5. Jacket | pvc or LSZH |
| 6. Standards | UL444/CSA-C22.2 No 214,Type CM |
| EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cable | |
| 7. Applications | internet,computer |
| 8. UTP | unscreen cable |
| 9. STP | single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire |
| 10. SFTP | Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid |
| 11. Network cable Connector detail specification | RJ45 8P8C nickel type |
| RJ45 8P8C golden type |
| Wiring Scheme | |
|---|---|
| ANSI/TIA/EIA-568-C.2 | T568A & T568B;ISO/IEC 11801 |
| 8-position conductor/pair assignment | |
| T568B | 1-2/3-6/4-5/7-8 |
| T568A | 3-6/1-2/4-5/7-8 |
| CORDAGE | |
| Constructor | 4 pairs, 7 strands, 24/26 AWG, UTP |
| Cable Type | UTP Cat.5e Patch Cable |
| Outer Cable Diameter | 5.5mm ± 0.2 mm |
| Pair Identification | |
| Pair1 | Blue/White |
| Pair2 | Orange/White |
| Pair 3 | Green/White |
| Pair4 | Brown/White |
| Outer Jacket | PVC/LSZH Jacket |
| Plug | |
| Type | Unshielded RJ45 8P8C Modular Plug |
| Housing | UL listed 94V-0/1/2 flame retardant polycarbonate |
| IDC blades | phosphor bronze, gold plating over 100 μin of nickel in contact area |
| Retention | 50 N (11 lbf) for 60±5 s |
|---|---|
| Mating cycle life | min 750 cycles |
| Tensile strength | ≥ 20 N per wire |
| Installation Temperature | 0°C to +60°C |
| Operating temperature | -20°C to +60°C |
| Minimum bend radius | 4 outer cable diameters |
| Boot Type: | Any type of the above picture |
| Length | 0.3m-30m or As per requested |
| Color | Grey/Green/Blue/White/Black/Red/Yellow |
| Package | polybag or Blister Package |
Send Us a Message
Welcome to contact us by fill the right contact form or write to us directly by the contact info below:
+86 (0) 755-23769401
[email protected]
Send us a message if you have any questions or request a quote. Our experts will give you a reply within 12 hours and help you select the right product you want.
Cat5e UTP Patch Cable, 100% Pure Copper, 24 AWG Stranded Cables
Unshielded Cat5e Cable is a network cable consisting of four twisted pairs of copper wire for Fast Ethernet (10/100BASE-T) and Gigabit Ethernet (1000BASE-T) delivering up to 100 MHz bandwidth.
OTSCABLES offer RJ45 Cat5e Ethernet Patch cable that can be connected using a punch-down, 110 block and modular connectors. Our Cat5e UTP Cable provides enhanced data transfer and lower crosstalk as compared to regular Cat5 cables.
Our high-quality Ethernet Cat5e UTP cables meet and exceed ANSI/TIA-568-C.2 standards. All our cables are UL Listed, ETL Verified and RoHS Compliant. We carry non-booted and snagless booted strain relief unshielded Cat5e cables with a variety of colors to choose from.
Unshielded Cat5e Ethernet Patch Cable, Non-Booted Crimped/Assembly Style
Construction of OTSCABLES Cat5e Non-Booted Patch Cord
Our Cat5e Non-booted UTP cables are constructed by stripping the cable into the standard patch cable length, and a 50-micron, gold-plated RJ45 connector is crimped unto the wires.
Benefits
Our non-booted Cat5e UTP patch cables are ideal for cramped up spaces where space-saving is a great deal. These are also ideal for simple applications and its more cost efficient than our booted cables.
Applications
You can easily install these cables in home and office applications, in modems, routers, servers, hubs, printers, switch boxes, gaming console, VoIP, computers and many more. Plus, our Ethernet Cat5e UTP cables are compatible with computer devices such as routers, patch panels, modems, switches and hubs.
Cat5e Molded Snagless Boot, Strain-Relief UTP Patch Cables
Construction of OTSCABLES Cat5e UTP Snagless Boot Patch Cord
Our Unshielded Cat5e Snagless, molded strain relief boot is made by injection molding, where the jacket material of the cable is pushed right into the connector and around the individual wires. They are designed with secure and efficiently constructed release tabs.
Benefits
In this way, the cable and connector is protected and dislodging of the RJ45 connector from the cable is less likely to happen as the molded boot provides strain relief support for the RJ45 connectors.
Applications
Cat5e UTP with snagless boot, RJ45 connectors Patch Cable is best for applications requiring frequent connection and disconnection from the source in many data centers.
Cat5e Crossover UTP Patch Cable
OTSCABLES carry Cat5e UTP Crossover cables when you want to connect devices without using hubs or switches. Our Cat5e UTP crossover cables are unshielded and terminated with 50 Micron gold plated contacts RJ45 plugs at each end. With crossover cables, you can easily connect two computers, still keeping great signal integrity.